Be good to your washer and dryer and those costly machines will be good to you.
Here’s how to keep your washer and dryer humming along safely and efficiently.
Before/After Every Load
1. Clean out dryer lint filter to maximize efficiency.
2. Dry the washer’s door and gaskets after using, and open the door on top-loaders to foster air circulation and prevent mold.
3. Always ensure that the washing machine is level and on firm footing.
4. Always use the proper type and amount of detergent for the machine and load. You can actually damage some models by using the premeasured pods. Check your manufacturer’s recommendations.
5. Remove damp clothes from washers immediately to prevent mold or mildew buildup.
1. Inspect the dryer exhaust duct for crimps, obstructions, and unnecessary bends.
2. Inspect washing machine hoses for tight fittings, bulges, cracks, and leaks. Burst washing machine hoses could spill hundreds of gallons of water an hour, flooding your home. Tighten loose fittings. Replace hoses every five years; replace immediately if damaged.
3. Clean rubber gaskets and drums on washers and dryers with a solution of equal parts water and vinegar.
4. Check and clean drain pump filter on front-loading washers. Consult your owner’s manual for location.
Every Three Months
Wash dryer lint filter with detergent to remove invisible chemical residues that can restrict airflow.
Remove and clean out the entire exhaust duct line from dryer to exterior. Clogged ducts cause thousands of house fires every year, with an average of about $10,000 worth of damages per fire.
1. Replace vinyl dryer exhaust ducts with metal ductwork to reduce fire hazards.
2. Replace rubber washing machine hoses with braided-metal ones to reduce the risk of bursting.
3. To prevent rusting, fill nicks and scratches on the outside of machines with touch-up paint.